TEEKAY Couplings has launched its new Teekay plastlock pipe coupling at the SMM marine trade fair in Hamburg, Germany.

Enabling simple, rapid and permanent joining of plain-ended plastic pipes, the product will greatly increase the ability of the marine industry to specify plastic pipes in builds and therefore realise the cost, time, space, weight and simplification benefits of the material, said a company release.

Key to the new product’s capability is its patented dynamic axial restraint system, which locks plastic pipes together without the need for gluing, heat fusing, flanging or pipe inserts. The system has two pipe wall gripping rings that adapt to higher levels of load as pressure in coupled pipes increases. These rings rotate on the pipe surface under higher loads, increasing the area gripping the pipe and reinforcing the seal.

This design concept follows through into the pipe anchoring mechanism, which includes three anchor rings at staggered heights. A chamber between each ring allows the pipe wall to migrate around the area where each anchor ring engages with it. These features allow for a dynamic lock on the pipe, ensuring all rings are continuously in contact with the pipe wall, resulting in a hold that permanently locks the two pipes together.

“By simply butting two plastic pipes together and connecting them with a Teekay plastlock pipe coupling, engineers can create a permanent coupling in an extremely short period of time and with a structure that is often stronger than the plastic pipes it’s connecting,” said Ian Webb, director at Teekay Couplings.

“This should be seen as a significant new product by the marine industry. Plastic pipes have a multitude of potential applications in marine engineering, many of which are likely to prove quietly revolutionary in what they enable designers to achieve,” he added.

With current methods of plastic pipe joining, heat fusion or gluing, there’s a cure time, which prolongs installation and delays testing and commissioning.